-40%

2017 Sacket Systems Industrial Battery Washer Very Lightly Used

$ 5174.39

Availability: 100 in stock
  • All returns accepted: ReturnsNotAccepted
  • Condition: Very good operating
  • Brand: Sacket Systems

    Description

    Very good running and operating
    Sacket Battery Washer Model AWC-A
    Used a few times in a large industrial plant (very clean operation).
    Over ,000 new cost
    AUTOMATIC BATTERY WASHER
    Protect your investment in your batteries with a SACKETT BATTERY WASHER with its unique NEUTRALIZING CYCLE. Regular washing and neutralizing of your batteries reduces or eliminates terminal and cable corrosion, as well as dirt and trash build-up on the battery tops.
    All models incorporate the same wash, unique neutralize, rinse and blow-off systems. They vary only in the method used to move the batteries in and out of the washer
    GENERAL SPECIFICATIONS FOR ALL MODELS

    Stainless steel cabinet with epoxy primer

    Machine mounted electrical panel

    NEMA IV Push Buttons

    1/2” port for in-plant water connection

    Limit Switch to prevent spray with door open

    Adjustable Blow Off Air Manifold
    (system supplied by in-plant compressed air)
    operates at 90 lbs. minimum, at 150 scfm of free air

    Panel Class II, UL approved

    24 Volt Controls, NEC
    ROLLERS

    Model “A” Only: 1/4” thick polyethylene sleeve on 2 3/8” diameter. rollers with sealed ball bearings.
    Model “A”

    (designed primarily for use with a Hydra-Handler)

    Single Powered Door

    (7) Gravity rollers 2 3/8” diameter., 1/4” extruded coated

    120v, 1ph, 24 volt control

    AC amp draw 3 amp, 15 amp branch

    Adjustable battery stop
    AUTOMATIC BATTERY WASHER
    Model A
    Model B
    Model A-Over/Under
    Battery Size:
    Max=46L x 40W x 31H with 20’ Covers
    Contruction:
    304 Stainless Steel
    Electrical:
    Water: Air:
    UL listed control panel
    Allen Bradley Controlled
    Model “A”: 115v, 1 phase, 60 hrz, 1 amp Approx. 7 gal/cycle, 45 psi min., 15 gpm min., 3/4” inlet.
    90 psi., 150 SCFM min., 3/4” inlet
    1033 Bryn Mawr Ave. • Bensenville • IL • 60106 • USA 630.766.5500

    fax 630.766.5631

    www.sackettsystems.com
    Located in Industry,CA
    I can assist in shipping this forklift anywhere and I get very favorable freight rates.
    California residents are subject to state sales tax