3M Night Vision Sun Control Window Films NV-15 NV-25 NV-35 60in X 50ft

Description

3M NIGHT VISION SUN CONTROL WINDOW FILMS
Please! Inform Film Type (NV-15, NV-25, NV-35) when ordering by e-mail or invoice.
Please check with your country's customs office to determine what these additional costs will be prior to buying.
Benefits
Great heat rejection provides energy savings and improved comfort.
A warm natural hue invites warmth and beauty to any room.
Extends the life of furnishings by significantly reducing UV rays, the largest cause of fading.
Low interior reflectivity, especially at night!
3M nano-technology enhances color stability.
Reduces glare and eye discomfort.
Comprehensive 3M manufacturer's warranty.
Increases personal safety from flying glass.
Scratch resistant coating.
- Material : metallized polyester
- What in the box : 60in X 50
ft (1500mm X 15m)
1. SUMMARY
A.
Section Includes: Abrasion-resistant, solar control, reflective window film. Film is designed to reduce gain of solar heat energy
through window by reflecting more to the exterior than interior. Traditional metalized films reflect equally both
inside and outside, where you need it, and less to the inside. The Night Vision line reflects more to the outside,
where you need it, and less to the inside, where you do not need it. 3M Night Vision, carbon impregnated
polyester layer provides outstanding heat rejection performance.
2. SYSTEM DESCRIPTION
B. Performance Data
6mm
Clear Glass
NV-15
NV-25
NV-35
Shading Coefficeint
0.94
0.32
0.45
0.55
Visible Light Transmitted
89%
15%
24%
36%
Visible Light External Reflected
8%
38%
19%
13%
Visible Light Internal Reflected
9%
11%
7%
7%
IR Reject
N/A
83%
72%
56%
U Value
1.03
0.98
1.00
1.03
U Value (W/m2K)
5.8
5.5
5.6
5.8
Heat Gain Reduction
N/A
66%
52%
41%
Heat Loss Reduction
N/A
4%
2%
0%
Glare Reduction
N/A
83%
73%
59%
UV Block
N/A
99%
99%
99%
TSER
19%
72%
61%
52%
( Film applied to 1/4 Inch (6.4 mm) Thick Clear Glass )
B. Film Attributes: The following attribute information is based upon 1/4 inch (6 mm) clear glass unless indicated otherwise:
1. Adhesive System: Pressure sensitive, weatherable, acrylate adhesive applied uniformly over surface opposite abrasion
resistant coated surface.
a. Viewing film from a distance of 10 feet (3 m) at angles up to 45 degrees from either side of glass, film shall not appear
distorted.
2. Flammability: Class A Interior Finish for Buildings Materials for both Flame Spread Index and Smoke Development Values per
ASTM E84.
3. Abrasion Resistance: Surface coating resistant to abrasion, with less than 5 percent increase of transmitted light haze
resulting per ASTM D1044 using 100 cycles, 500 grams of weight, and CS10F Calbrase Wheel.
3. PRODUCT MATERIALS
A. Film Material: Film material consists of an optically clear metallized polyester film which may be laminated to a clear polyester
film.
Provide films with acrylic abrasion-resistant coating over surface of film for enhanced durability.
1. Film Color: Derived from metal coating and/or components, and product will not contain conventional dyed polyester.
2. Provide uniform film, without noticeable pin holes, streaks, thin spots, scratches, banding, or other optical defects. Variation in
total transmission across width, at any portion along length, shall not exceed 2 percent over average. Density of film across
web is not to exceed plus or minus 2 percent. Provide film with no evidence of coating voids.
4. PREPARATION
A. Use protective tarps and drop cloths to cover interior finishes near window.
B. Turn off or cover heating and air conditioning ventilation ducts.
C. Clean window and window framing thoroughly with cleaning solution consisting of 90 percent water and 10 percent ammonia.
Blade inside surface of window glass with industrial razors to insure removal of foreign contaminants.
1. Tape and seal cracked and deteriorating window sealant.
D. Place towel or other absorbent material on window sill or sash to absorb moisture accumulation generated by film application.
E. Thoroughly rinse glass from top to bottom with pressure spray tank.
F. Squeegee entire glass surface.
G. Dry glass edges and window frames using a lint-free towel.
5. I
NSTALLATION
A. Install in accordance with manufacturer's instructions.
B. Cut film edges neatly and square at a uniform distance of 1/8 inch (3 mm) to 1/16 inch (1.5 mm) of
window sealant.
Use new blade tips after 3 to 4 cuts.
C. Spray the slip solution, composed of one capful of baby shampoo or dishwashing liquid to 1 gallon of water,
on window glass and adhesive to facilitate proper positioning of film.
D. Apply film to glass and lightly spray film with slip solution.
E. Squeegee from top to bottom of window. Spray slip solution to film and squeegee a second time.
F. Bump film edge with lint-free towel wrapped around edge of a 5-way tool.
G.Upon completion of film application, allow 30 days for moisture from film installation to dry thoroughly,
and to allow film to dry flat with no moisture dimples when viewed under normal viewing conditions.
H. If completing an exterior application, check with the manufacturer as to whether edge sealing is required.
6. CLEANING AND PROTECTION
A. Remove left over material and debris from Work area. Use necessary means to protect film before, during,
and after installation.
B. Touch-up, repair or replace damaged products before Substantial Completion.
C. After application of film, wash film using common window cleaning solutions, including ammonia solutions,
30 days after application. Do not use abrasive type cleaning agents and bristle brushes to avoid scratching
film.
Use synthetic sponges or soft cloths.
INFORMATION
SHIPPING
-
We ship worldwide. This item will be shipped to you from Korea, South.
-
We provide international tracking number.
-
We ship your orders almost within 2 business days after your payment.
-
Please confirm your address is correct. We only ship to the address listed on eBay.
-
It might take more than usual by any unpredictable events including weather condition, no nonstop shipping, customs & house policy in your country. Please Understand it.
-
It takes more 2 or 4 weeks to receive items in South America, Russian Federation and Africa.
-
Import duties, taxes and charges are not included in the item price or shipping charges. Buyers are responsible for these charges. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.
RETURNS
-
We accept the returns for any reason, but item must be "Not Opened Condition." All returns must be sent within 14 days of receipt of your package.
-
Once receiving the returned item, we will contact buyers to arrange refund of merchant value. Please note that postage is NOT refundable.
-
If you received wrong item, please let us know it through “ask a question” below on t the listing. To resolve problem, we will exchange it to the correct item.
In this case, we pay the cost of shipping.
-
If the items have returned to us under the unclaimed status, we will give you a full refund except postage.
PAYMENT
-
We accept the payments through the PayPal only.
-
We have partnered with Paypal to offer you the very best in payment services. PayPal allows you to buy with confidence
-
Items must be paid within 3 days of auction ended. Otherwise, we can't guarantee your item is still available.
OTHER TERMS & CONDITIONS
-
Feedback will be left once after we have received payment from buyer. Please do not forget to leave us FIVE STARS on all of the Detailed Seller Ratings.
-
Please DO NOT leave a neutral or negative feedback without contacting us first to get a better solution. A better solution for you is better than any other neutral or negative feedback. (A seller of anyone with star scores below 3 can no longer sell.)
-
If you have any question about our listings or your purchase, please email to us through "MY MESSAGES" or "Ask Seller Questions".
-
We will reply to you ASAP, but if no responses have made within 48 hours for you, please check the spam list in your mail box.