Goldblatt 7Inch Wet Tile Saw Electric Ceramic Tile Cutter Tool w/Extension Table

Description

【
7 Inch Wet Tile Saw
】Featured with carry handle and extension table design, contain removable components rip fence, mitre guide, upper blade guard, metal bracket, saw blade, locking knob, spanners and instruction manual. To perform 22.5° or 45° bevel cutting, raise one side of the table, lever out the support and locate the tabs into the corresponding holes in the deck. Ensure that the deck is correctly secured before working.
【
Tile Saw Technical Specifications
】Smooth countertop solid and durable. Before switching on, make sure that the voltage of 120V~60Hz 5.0AMP, and no load speed is 5300 RPM, The insulation class is l. Dimensions of the diamond disc is 7"x 5/8"(180 x16 mm) and working table size is 13-9/16"x13-9/16"(345 x345 mm). Maximum cutting depth is 1-3/16"(30 mm) at 90°, max. workpiece thickness for 45° jolly cut is 15/32"(12 mm). Whole weight is 16.75 lbs (7.6 kg).
【
Guide to Insall and Use
】Accurate straight and mitre cutting can be performed by using the mitre cutting guide and adjustable rip fence. Make sure the 45° vertical fence is locked firmly in place before beginning cut, the upper protective guard can move freely and cannot touch the cutting disc and metal bracket must always be aligned to the cutting disc so that it does not Interfere with material being cut. Set extension table to the desired distance to support large tiles when cutting.
【
Note in Water Store
】Fill the reservoir with water only until water can drain from the opening in the plug. Ensure that water just cover the disc edge (no more than 1/4 of the disc is submerged in water). During use the water level must never drop below the MlN marking. When change reservoir water, out the water reservoir plug and empty into a bucket do not allow water to splash onto ground or around machine.
【
Application Scope for Tile Cutting
】Easy to cut ceramic, marble, slate and stone tile, great for moving into workshops or carrying to job sites. There are 3 straight, bevel and cutting modes at other angles. Mitre cut is used for cutting outside and inside corners on material, decorative chair rails and base moldings. Please read the user manual before using electric tile cutter, wear goggles and gloves while working. ON/OFF guarantee effective control until you're ready to use.
Manufacturer
‎‎Hang Zhou Great Star Industrial Co.,LTD
Item Weight
‎19.51 pounds
Product Dimensions
‎30 x 22 x 9 inches
Country of Origin
‎China